P0929
Gear Shift Lock Solenoid/Actuator Control Circuit A Range/Performance
Set when the shift lock actuator on circuit A is electrically present but does not respond as commanded, for example it fails to reach the locked or released position. Ford stores it in the gear shift module (GSM): SSM 51057 and 53039 list P0929:77 (commanded position not reachable) on Mach-E, Escape, Bronco Sport, Maverick and Transit, fixed by GSM software or replacement; TSB 25-2045 adds P0929:00, :07 and :9A on 2021-24 F-150 together with a selector that will not leave or enter Park, and checks pin 3 of connector C211. Ford shows the wrench lamp, not the MIL. P0928, P0930 and P0931 are the pure electrical faults of circuit A, P092B the same fault on circuit B.
Possible causes
- Gear shift module software that misjudges the actuator position (Ford reprogramming bulletins) high
- Worn or binding lock actuator inside the shifter assembly medium
- Poor pin fit or damaged pin at the shifter connector medium
Symptoms
- Wrench or transmission warning lamp on
- Selector will not leave Park or will not go back into Park
- Clicking from the shifter or a selector that does not stow or unstow
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0929
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.