OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0924

Gear Shift Reverse Actuator Circuit/Open

Concerns the drive circuit that moves the shift mechanism of an automated manual gearbox in the reverse shift direction, i.e. opposite to the forward actuator. It does not mean the reverse gear itself. Depending on design this is the second solenoid valve of a double-acting shift cylinder or the second rotation direction of an electric shift motor. The code sets when the module finds this output open or electrically faulty. No manufacturer documents the code publicly. A ZF patent assigns one 3/2 solenoid valve to each cylinder chamber, an Isuzu patent reverses the shift motor depending on shift direction. CARB requires circuit checks on outputs. P0925 to P0927 are the siblings, P0920 the forward direction. Gears in this direction cannot be engaged.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 24

Possible causes

  • Loose, corroded or unplugged connector at the shift actuator or valve high
  • Broken drive wire between module and actuator medium
  • Open solenoid coil or motor winding in the actuator medium
  • Faulty driver stage in the transmission control module low

Symptoms

  • Transmission warning light on
  • Some gears cannot be selected or the gearbox stays in neutral
  • Gear changes out of the current gear may fail

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0924

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication