OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0922

Gear Shift Forward Actuator Circuit Low

Set when the drive circuit of the forward shift actuator of an automated manual gearbox shows a voltage that is too low for the current switching state. This usually points to a short to ground on a valve or motor line, or to an internal short in the actuator. Many controllers then switch the output off to protect the driver stage. No manufacturer documents this code publicly. A ZF patent drives each chamber of a double-acting shift cylinder through its own solenoid valve, and an Isuzu patent runs an electric shift motor in both directions, so a fault can affect one shift direction only. CARB requires circuit checks on outputs. P0923 is the opposite high fault, P0920 the open circuit, P0926 the reverse direction. Gears in this direction are blocked.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 22

Possible causes

  • Drive wire chafed through and shorted to ground high
  • Internal short in solenoid coil or shift motor medium
  • Water or corrosion bridging pins in the connector low

Symptoms

  • Transmission warning light on
  • Certain gears can no longer be engaged
  • Gearbox may stay in neutral or hold one gear

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0922

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication