P0920
Gear Shift Forward Actuator Circuit/Open
Concerns the drive circuit that moves the shift mechanism of an automated manual gearbox in the forward shift direction. Depending on design this is one of two solenoid valves on a double-acting shift cylinder or one rotation direction of an electric shift motor. The code sets when the module finds this output open or electrically faulty, e.g. no current while the driver is on. No manufacturer documents the code publicly. A ZF patent feeds each chamber of a double-acting cylinder through its own 3/2 solenoid valve, an Isuzu patent turns the shift motor forward or reverse by shift direction. CARB requires circuit checks on outputs. P0921 to P0923 are the siblings, P0924 the reverse direction. Gears in this direction can no longer be engaged.
Possible causes
- Loose, corroded or unplugged connector at the shift actuator or valve high
- Broken drive wire between module and actuator medium
- Open solenoid coil or motor winding in the actuator medium
- Faulty driver stage in the transmission control module low
Symptoms
- Transmission warning light on
- Some gears cannot be selected, the gearbox skips them or stays in neutral
- Vehicle may only move off in a limited set of gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0920
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.