P091B
Gear Shift Position Circuit B Range/Performance
Plausibility fault of the shift position signal on circuit B in an automated manual gearbox. The voltage stays within its electrical limits, yet the value does not fit: it disagrees with circuit A, does not change while the shift actuator moves, or does not match the learned gear positions. No manufacturer documents this code publicly. A Nissan/Aichi patent notes that sensor mountings on shift parts can deform under vibration and falsify the reading, and an Aisin AI patent describes how the control continues when a stroke sensor is no longer trusted. CARB requires rationality checks on such inputs. P091A, P091C and P091D are the electrical faults of circuit B, P0915 the same check on circuit A. Gear changes may be limited.
Possible causes
- Worn or drifting shift position sensor, channels A and B disagree high
- Bent sensor bracket or displaced magnet on the shift rail medium
- Gear positions not relearned after actuator or module replacement medium
- Increased contact resistance in the sensor circuit low
Symptoms
- Transmission warning light on
- Harsh or aborted gear changes
- Fallback mode with fewer available gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P091B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.