P091A
Gear Shift Position Circuit B
Circuit B is a second channel reporting the shift position of an automated manual gearbox, for instance a redundant sensor track or a separate sensor on another shift rail. This general circuit code sets on an electrical fault on that signal that matches none of the more specific B variants. No manufacturer documents the code publicly, and which physical sensor carries the letter B depends on the design. Patents from Aisin AI and Nissan/Aichi describe shift stroke sensors as the feedback for gear engagement, an Aisin AI patent also covers the fallback when a stroke sensor fails. CARB requires circuit checks on such inputs. P091B to P091D are the B siblings, P0914 and P095A the same signal on circuits A and C. Shifting may be restricted.
Possible causes
- Loose or corroded connector at the shift position sensor high
- Damaged signal, supply or ground wire of sensor circuit B medium
- Faulty shift position sensor B medium
- Faulty sensor input in the transmission control module low
Symptoms
- Transmission or engine warning light on
- Slower or restricted gear changes in fallback mode
- Gearbox may hold a gear or stay in neutral
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P091A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.