P0914
Gear Shift Position Circuit A
Circuit A of the gear shift position sensor reports how far the shift mechanism of an automated manual gearbox has moved in the shift direction, i.e. whether a gear is engaged, in neutral or in between. This generic circuit code sets on an electrical fault on that signal that does not match the more specific variants. No manufacturer documents the code publicly. An Aisin AI patent pairs such a shift stroke sensor with a select stroke sensor, and a Nissan/Aichi patent places the shift position sensor as a magnet and field detector on the piston of a hydraulic shift actuator. CARB requires circuit checks on such inputs. P0915 to P0919 are the siblings, P091A and P095A the same signal on circuits B and C. Without it the module cannot confirm the engaged gear and usually blocks shifting.
Possible causes
- Loose or corroded connector at the shift sensor or actuator unit high
- Damaged sensor wiring near the gearbox medium
- Faulty gear shift position sensor medium
- Faulty sensor input or reference supply in the transmission control module low
Symptoms
- Check engine or transmission warning light on
- Gearbox stops shifting or stays in neutral
- Engine may not start because neutral cannot be confirmed
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0914
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.