P090C
Clutch B Actuator Control Circuit Low
Set when the control circuit of the clutch B actuator shows a low state, which on the documented application means a short to ground. Ford defines P090C as the short-to-ground check of the clutch B motor in the DPS6 PowerShift gearbox, paired with P090A for an open circuit and P090D for a short to power. Ford's TCM program 14M02 for 2011-2015 Fiesta and Focus also lists P090C among the codes that a defective TCM can cause, so the module belongs on the suspect list along with the motor and its wiring. Swapping the identical clutch motors helps: if the fault moves to P0902, the motor is bad. CARB requires circuit monitoring of such outputs. Expect missing gears, erratic shifts or no drive.
Possible causes
- Clutch B actuator motor with internal short to ground high
- Failed TCM output stage (Ford program 14M02 lists this code) medium
- Chafed motor wire touching ground medium
Symptoms
- Check engine light on
- Even gears or reverse unavailable
- Limp mode or no drive
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P090C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.