P090B
Clutch B Actuator Control Circuit Performance
Set when the clutch B actuator circuit is electrically connected but the actuator does not respond as commanded, for example too slowly or with an unexpected current draw. Ford uses P090B on the DPS6 PowerShift transmission. Trade guidance for this gearbox starts with a visual check of the harness from the TCM to the clutch B motor, then swaps the two identical clutch motors: if the code becomes P0901, the motor with its built-in position sensor is faulty; if P090B stays, the circuit or TCM needs pinpoint testing. Ford's TCM program 14M02 for 2011-2015 Fiesta and Focus also lists P090B as a code where the TCM itself can be the cause. P090A, P090C and P090D are the pure circuit faults of clutch B.
Possible causes
- Worn or sluggish clutch B actuator motor high
- TCM fault (Ford program 14M02 lists this code) medium
- Damaged harness between TCM and clutch B motor medium
Symptoms
- Check engine light on
- Shudder or slipping in even gears and reverse
- Delayed or missed shifts, possible limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P090B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.