P090A
Clutch B Actuator Control Circuit/Open
Watches the drive circuit of the actuator for clutch B, the second clutch of a dual-clutch transmission, and sets when the module finds an open circuit. Ford uses it on the DPS6 PowerShift of the Fiesta and Focus: the clutch B electric motor is tested for driver faults (P087A), hall sensor faults (P087B), sequence errors (P087E), an open circuit (P090A), a short to ground (P090C) and a short to power (P090D). Trade guidance for the DPS6 is to swap the two identical clutch motors; if the code moves to the clutch A equivalent P0900, the motor is defective, otherwise the harness or TCM is. CARB requires circuit monitoring of such outputs. Shifting becomes erratic and the gearbox may refuse to drive.
Possible causes
- Failed clutch B actuator motor high
- Loose connector or broken wire to the clutch B motor medium
- Faulty motor driver inside the TCM low
Symptoms
- Check engine light on
- Even gears or reverse missing, erratic shifts
- Limp mode or no drive
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P090A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.