P0902
Clutch A Actuator Control Circuit Low
Set when the control circuit of the clutch A actuator shows a low state, in practice a short to ground on a motor or control line. Ford defines it exactly this way for the DPS6 PowerShift transmission: the TCM tests the three-phase clutch A motor for open circuit (P0900), short to ground (P0902) and short to power (P0903), next to hall sensor and sequence checks. Ford's TCM program 14M02 for 2011-2015 Fiesta and Focus also lists P0902 among the codes for which a failed TCM can be the cause, so the module itself is a real suspect besides the motor and harness. P090C is the same fault on clutch B. With the clutch no longer controllable, the gearbox goes into a fallback mode.
Possible causes
- Clutch A actuator motor with internal short to ground high
- Failed TCM output stage (Ford program 14M02 lists this code) medium
- Chafed motor wire touching ground medium
Symptoms
- Check engine light on
- No drive or only some gears available
- Jerky take-off and shift faults
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0902
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.