OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0900

Clutch A Actuator Control Circuit/Open

Watches the drive circuit of the actuator that opens and closes clutch A in an automated or dual-clutch transmission. The code sets when the module detects an open circuit, so it cannot energise the actuator. Ford documents it for the DPS6 PowerShift gearbox in the Fiesta and Focus, where each dry clutch is moved by a three-phase electric motor with hall sensors; P0900 is the open-circuit check of the clutch A motor, alongside P0902 (short to ground) and P0903 (short to power). Ford program 20B23 for some 2016-2017 Focus cars lists P0900 with a lit check engine light and erratic shifts caused by failed clutch actuator motors. P090A is the same fault on clutch B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number9 / 00

Possible causes

  • Failed clutch A actuator motor (open winding or internal fault) high
  • Loose connector or broken wire between TCM and actuator medium
  • Faulty motor driver inside the TCM low

Symptoms

  • Check engine light on
  • Erratic or missed shifts, vibration on take-off
  • Transmission in limp mode, possibly no drive

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0900

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication