OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08E6

Shift Solenoid L Control Circuit/Open

Open circuit in the control path of shift solenoid L: harness, connector, internal transmission wiring or the coil itself no longer carry current, so the valve cannot be energised. No manufacturer documents this code publicly. Among the documented analogues, Ford reports an open circuit through each solenoid's base code, P0750 for solenoid A, and GM counts it as part of the high-voltage code P0974; a stand-alone open code therefore has no known user. Ford's electrical checks need 0.5 to 5 seconds of mismatch between command and feedback. CARB requires the check. Measuring coil resistance at the transmission connector separates a coil fault from a harness break. P08E4 and P08E5 cover the shorts.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / E6

Possible causes

  • Break in the harness or internal transmission wiring high
  • Open solenoid coil medium
  • Connector unlatched or terminal backed out low

Symptoms

  • Check engine or transmission warning light on
  • Gear range missing or fixed gear
  • Harsh shifts

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P08E6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication