P08E4
Shift Solenoid L Control Circuit Low
Low-voltage fault in the control circuit of shift solenoid L. Usually it means a short to ground on the control wire, less often a coil with shorted windings that pulls the voltage down. No manufacturer documents this code publicly. GM's analogue for solenoid A, P0973 on the 6-speed units, needs a ground-short flag from the output hardware for 1.2 of 1.5 seconds and lights the MIL after one trip; Ford names P0973 a short to ground and runs the check continuously. CARB requires circuit monitoring. P08E5 is the high-voltage counterpart, P08E6 the open circuit. A shorted output usually forces the TCM into a safe substitute gear, and acceleration feels weaker.
Possible causes
- Control wire shorted to ground high
- Coil with shorted windings medium
- Fluid or moisture in the connector creating a path to ground low
Symptoms
- Check engine or transmission warning light on
- Transmission locked in a substitute gear
- Weak acceleration
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08E4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.