P08E0
Shift Solenoid L Stuck On
Functional fault of shift solenoid L in the opposite direction: although switched off, the valve keeps its circuit applied, leaving engaged a clutch that should be released. No manufacturer documents this code publicly. As a model, GM's P0752 for solenoid A sets after one trip when gearbox slip reaches 400 rpm with third gear commanded but first or second actually engaged, and Ford's mechanical check reads a stuck-on solenoid from the gear the transmission really obtains. CARB requires such functional checks. Electrical causes are rare here; a seized spool or an output stage that never switches off is more likely. P08DF is the stuck-off fault. Possible effects are tie-up, harsh shifts and limp mode.
Possible causes
- Shift spool seized in applied position high
- Contaminated fluid after clutch or bearing wear medium
- TCM output stage does not switch off low
Symptoms
- Check engine or transmission warning light on
- Drivetrain binding or harsh shifts
- Limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P08E0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.