P08DD
Shift Solenoid K Control Circuit/Open
Signals that the control circuit of shift solenoid K is open, so commanding the valve produces no current: a broken wire, a pushed-out terminal, a burnt coil or a failed internal transmission harness. No manufacturer documents this code publicly. Ford handles opens through the base code of each solenoid, P0750 for solenoid A, while GM's tables fold them into the circuit-high code P0974, so a separate open code like this one stays unused in both systems. CARB requires transmission outputs to be checked for opens. P08DB and P08DC are the short-circuit codes, P08D8 the general electrical fault. Without power the valve stays in its rest position, so one gear range drops out.
Possible causes
- Broken wire or pushed-out terminal high
- Failed internal transmission harness medium
- Burnt-out solenoid coil medium
Symptoms
- Check engine or transmission warning light on
- Some gears no longer available
- Limp mode with fixed gear
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08DD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.