P08DC
Shift Solenoid K Control Circuit High
The monitored control line of shift solenoid K sits closer to supply voltage than it should, for instance because it touches a powered wire or, depending on the driver design, because the coil is open. No manufacturer documents this code publicly. GM treats the solenoid A version, P0974, as open or power short and fails it after 1.2 of 1.5 seconds, but lights the MIL only after two trips. Ford's P0974 means a short to power only, because Ford reports opens separately. CARB requires this circuit check. P08DB is the low counterpart, P08DD the open-circuit code. A valve shorted to power may stay energised, giving a wrong gear or harsh engagements.
Possible causes
- Control wire touching a powered conductor high
- Open coil on systems that read opens as high medium
- TCM low-side driver no longer pulls the line down low
Symptoms
- Check engine or transmission warning light on
- Wrong gear or harsh engagement
- Possible limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08DC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.