P08DB
Shift Solenoid K Control Circuit Low
The TCM's output stage reports a voltage on the shift solenoid K control circuit below what the commanded state requires, the classic sign of a control wire rubbing through to ground or a coil with an internal short. No manufacturer documents this K code publicly. For solenoid A, GM's 6-speed tables set P0973 when a ground short is flagged for 1.2 out of 1.5 seconds, with at least 9 V supply and the engine running, and light the MIL after one trip; Ford lists P0973 as short to ground. CARB mandates the check. P08DC is the opposite fault and P08DD the open circuit. Many TCMs then disable the valve, so expect a limp-home gear.
Possible causes
- Control wire rubbed through to ground high
- Internally shorted solenoid coil medium
- TCM output stage fault low
Symptoms
- Check engine or transmission warning light on
- Transmission stays in a limp-home gear
- Reduced acceleration due to missing gears
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08DB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.