P08D8
Shift Solenoid K Electrical
Collective electrical fault for shift solenoid K, used by makers that do not split circuit faults into low, high, open or range codes. No manufacturer documents this code publicly. The pattern exists for earlier letters: Hyundai stores P0753 (shift control solenoid valve A electrical) on the Genesis G80 and G90 8-speed and, per bulletin 21-AT-016HG, replaces the solenoid once the harness checks out, with valves listed only up to F. Ford's electrical check fails a solenoid when the driver feedback contradicts the command for 0.5 to 5 seconds. CARB requires circuit monitoring of transmission outputs. P08DA to P08DD are the detailed codes. The TCM usually reacts at once with altered shifting.
Possible causes
- Solenoid coil open or shorted high
- Damaged harness or corroded connector medium
- TCM output driver fault low
Symptoms
- Check engine or transmission warning light on
- Harsh or missing shifts
- Transmission may lock into a limp-home gear
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08D8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.