P08D7
Shift Solenoid K Stuck On
Stored when shift solenoid K is switched off but the circuit it feeds stays pressurised, so a clutch remains applied. No manufacturer documents this code publicly. GM's P0752 for solenoid A is the documented analogue: with third gear commanded, the TCM fails the valve when gearbox slip reaches 400 rpm while the transmission actually sits in first or second, and the MIL lights after a single trip. Ford flags stuck-on solenoids from the gear actually reached during its mechanical check. CARB demands this functional monitoring. P08D6 is the opposite fault, P08D8 and P08DA to P08DD the circuit faults. Drivers may notice a wrong starting gear, binding, harsh engagement or emergency mode.
Possible causes
- Valve or shift spool jammed in applied position high
- Metal debris in the fluid after internal wear medium
- TCM output or shorted wire keeps the solenoid energised low
Symptoms
- Check engine or transmission warning light on
- Wrong gear when pulling away
- Binding or harsh engagement
- Limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P08D7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.