OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08D6

Shift Solenoid K Performance/Stuck Off

Indicates that shift solenoid K was commanded on but the gear or clutch behind it never engaged, as if the valve stayed in its off position. No manufacturer documents this code publicly. A documented model is GM's P0751 for solenoid A on the 6-speed units: with first gear commanded, the TCM counts a fault when slip reaches 400 rpm and the measured ratio sits in a fixed window that points to the wrong gear, and it needs two trips to light the MIL. Ford infers a solenoid failed off from the obtained gear or shift pattern over three solenoid events. CARB requires this functional check. The reverse fault is P08D7. Typical signs are engine flare during shifts and a skipped gear.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / D6

Possible causes

  • Valve or shift spool held in rest position by debris or varnish high
  • Low fluid level or weak line pressure medium
  • Leaking seal or worn clutch pack in the circuit fed by the valve medium

Symptoms

  • Check engine or transmission warning light on
  • Engine flare or slipping during shifts
  • A gear is skipped or missing

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P08D6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication