P08D3
Shift Solenoid J Control Circuit High
Logged when the control line of shift solenoid J reads higher than the commanded state allows, pointing to a short to battery voltage or, on some designs, an open coil. No manufacturer documents this code publicly. In GM's tables the high code for solenoid A, P0974, covers both an open circuit and a short to power, fails after 1.2 of 1.5 seconds and needs two trips for the MIL, while Ford keeps opens apart and uses its high code for shorts to power only. Which reading applies to J therefore depends on the maker. CARB requires the circuit check. P08D2 is the low-side counterpart, P08D4 the dedicated open-circuit code. A valve that cannot be driven correctly leads to wrong or missing gears.
Possible causes
- Control wire shorted to a voltage-carrying conductor high
- Open solenoid coil (on systems that report opens as high) medium
- Moisture in the transmission connector bridging pins low
Symptoms
- Check engine or transmission warning light on
- Wrong gear or harsh engagement
- Possible limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08D3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.