OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08D0

Shift Solenoid J Intermittent

Reserved for a shift solenoid J fault that comes and goes instead of being present continuously, typically brief circuit dropouts or erratic valve response. No manufacturer documents this code publicly, and the intermittent codes of the earlier shift solenoids, such as P0754 for solenoid A, are not used in the GM and Ford sources checked either; those makers report dropouts through their open, short or functional codes. Ford runs its solenoid electrical checks continuously with 0.5 to 5 second filters, so short interruptions are caught there. CARB requires circuit monitoring of transmission output components in general. P08CF and P08D1 to P08D4 are the permanent electrical faults. Drivers notice occasional harsh shifts or a passing warning light.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / D0

Possible causes

  • Loose or corroded connector losing contact under vibration or heat high
  • Chafed harness with intermittent short or break medium
  • Valve sticking now and then due to contaminated fluid medium
  • Solenoid coil failing only when hot low

Symptoms

  • Warning light that comes and goes
  • Occasional harsh or delayed shifts
  • Sporadic limp mode that clears after restart

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P08D0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication