P08CF
Shift Solenoid J Electrical
General electrical fault of shift solenoid J, used when a manufacturer does not split the circuit fault into open, low, high or range codes. No manufacturer documents this code publicly. The analogue for solenoid A, P0753, is used by Hyundai for Genesis G80 and G90 8-speed transmissions as Shift Control Solenoid Valve A Electrical; bulletin 21-AT-016HG lists electrical codes for valves A to F and has the solenoid replaced after checking the harness, without any J valve. Ford's electrical check flags a solenoid when driver feedback disagrees with the commanded state for 0.5 to 5 seconds. CARB requires circuit monitoring when a functional check is not feasible. P08D1 to P08D4 are the detailed circuit codes. Shift quality usually drops at once.
Possible causes
- Solenoid coil open or shorted internally high
- Damaged harness, corroded or loose connector at the transmission medium
- Fault in the internal transmission harness or solenoid body medium
- TCM output driver fault low
Symptoms
- Check engine or transmission warning light on
- Harsh or missing shifts
- Transmission may lock into a limp-home gear
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08CF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.