OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08CC

Shift Solenoid J

Base code for the tenth on/off shift solenoid of an automatic transmission; which valve gets the letter J is decided by the manufacturer. No manufacturer documents this code publicly. Ford's gasoline OBD summary ends its shift solenoid list at SS E, the Genesis 8-speed bulletin stops at solenoid F, and GM and Toyota label their later valves as pressure control or clutch solenoids, so J stays unused in the known sources. CARB requires automatic transmission solenoids to be checked for functional response and circuit faults. A manufacturer reporting the fault type through a DTC suffix, as Toyota does for pressure control solenoid L, would store such faults under this base code instead of P08CD to P08D4. Expect harsh, missing or substitute-gear shifts.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / CC

Possible causes

  • Shift solenoid J faulty (coil or valve) high
  • Contaminated or degraded transmission fluid restricting the valve medium
  • Connector or harness fault between TCM and solenoid medium
  • Transmission control module output fault low

Symptoms

  • Check engine or transmission warning light on
  • Harsh, delayed or missing shifts
  • Transmission may hold a substitute gear

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P08CC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication