OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08C9

Pressure Control Solenoid M Control Circuit Range/Performance

Meant for a control circuit of pressure control solenoid M that is not open or shorted but behaves implausibly, for instance a coil current that does not follow the command. No manufacturer documents this code publicly. GM, which uses letter M for synchronizer actuation valve 1 of the Corvette dual clutch, publishes only open, low, high and the two hydraulic codes for it; its tables do describe a current check that compares target and estimated current (more than 70 % for 60 ms or more than 400 mA for 300 ms), but without naming P08C9. CARB requires monitoring of transmission solenoids. Possible causes are a coil with drifting resistance, contact resistance or supply voltage problems; shift quality may suffer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / C9

Possible causes

  • Coil resistance out of specification high
  • High contact resistance at connector pins medium
  • Unstable supply voltage to the transmission module low

Symptoms

  • Check engine light on
  • Uneven shift quality

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P08C9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication