P08C7
Pressure Control Solenoid M Intermittent
Reports an on-and-off fault of pressure control solenoid M, such as brief circuit dropouts or occasional implausible responses. No manufacturer documents this code publicly; GM, which uses letter M for synchronizer actuation valve 1 of the Corvette dual clutch, lists no intermittent code for it, and earlier packages found the intermittent codes of the other pressure control solenoids unused as well. GM's circuit tests need a fault to last 150 ms, so short dropouts mostly end up as P08C8, P08CA or P08CB once they persist. CARB requires transmission solenoids to be monitored. Loose terminals and chafed wires are the likely causes; symptoms are sporadic shift faults and a warning light that comes and goes.
Possible causes
- Loose terminal at the solenoid or transmission connector high
- Chafed wire with intermittent contact medium
- Debris causing occasional valve hang-ups low
Symptoms
- Warning light that comes and goes
- Sporadic rough shifts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08C7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.