P08C0
Pressure Control Solenoid L Control Circuit Range/Performance
Set when the control circuit of pressure control solenoid L is electrically intact but its behaviour is implausible, for example the current through the coil does not match the commanded value. No manufacturer documents this code publicly; Toyota, the only documented user of letter L, publishes only P08BA71. As an orientation, GM's tables for the comparable solenoid M list a current check next to the circuit tests: a deviation of more than 70 % for 60 ms or more than 400 mA for 300 ms between target and estimated current, without naming P08C9 for it. Causes are a coil with changed resistance, contact resistance or supply problems. P08BF, P08C1 and P08C2 cover clear open or short faults.
Possible causes
- Coil resistance out of specification high
- High contact resistance at connector pins medium
- Unstable supply voltage to the transmission module low
Symptoms
- Check engine light on
- Uneven shift quality
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08C0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.