P08BE
Pressure Control Solenoid L Intermittent
Reports a fault of pressure control solenoid L that comes and goes, typically a circuit that drops out briefly or a valve response that is only occasionally implausible. No manufacturer documents this code publicly, and in earlier packages the intermittent codes of the other pressure control solenoids also proved unused. Toyota, the one documented user of letter L, publishes only P08BA71. GM's circuit tests for the comparable solenoid M confirm a fault only after it persists for 150 ms, which is why brief dropouts tend to surface as a stored circuit code instead. CARB requires transmission solenoids to be monitored. Loose pins and chafed wires are the likely causes; symptoms are occasional shift flare or a short-lived fallback mode.
Possible causes
- Loose or spread terminal at the solenoid or transmission connector high
- Chafed wire touching ground intermittently medium
- Debris making the valve hang only now and then low
Symptoms
- Warning light that comes and goes
- Occasional harsh or flaring shift
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P08BE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.