P08BC
Pressure Control Solenoid L Stuck On
Set when pressure control solenoid L keeps applying pressure although the control module has commanded it off, so the element it feeds stays loaded. No manufacturer publishes this code. Toyota, the only documented user of letter L, files a stuck valve under P08BA71 instead. GM's P08C5 for solenoid M of the Corvette dual clutch shows how such a check can work: after a selector valve change the module watches the shift rods, and unexpected movement of one rod or relaxation of another within 200 ms points to a valve that keeps pressure on. CARB lists transmission solenoids as monitored output components. P08BB is the stuck off counterpart. For the driver this means shift shock, binding or a fallback gear.
Possible causes
- Valve spool held open by debris high
- Worn bore in the valve body letting pressure through medium
- Output stage or wiring keeping the solenoid energised low
Symptoms
- Check engine light on
- Harsh engagement or binding during shifts
- Transmission locked in a fallback gear
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P08BC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.