P08BB
Pressure Control Solenoid L Performance/Stuck Off
Set when pressure control solenoid L is commanded but the pressure or shift element it serves does not respond, i.e. the valve acts as if it were stuck in its off state. No manufacturer documents this code publicly. Toyota, the only known user of letter L, reports a stuck valve as P08BA with suffix 71 instead. The closest documented analogue is GM's P08C4 for solenoid M on the Corvette dual clutch, where an intrusive routine moves the shift rods slightly and flags the valve when the expected rod travel stays below 100 µm. CARB requires such functional checks for transmission solenoids. P08BC is the opposite fault, P08BF to P08C2 cover the circuit. The driver notices missing or harsh shifts.
Possible causes
- Valve spool held closed by debris or varnish high
- Low fluid level or weak supply pressure to the valve medium
- Leaking seal or circuit downstream of the valve medium
Symptoms
- Check engine light on
- Missing, slipping or delayed shifts
- Possible substitute gear operation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P08BB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.