OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08BA

Pressure Control Solenoid L

Base code for the twelfth pressure control solenoid of an automatic transmission; which valve carries the letter L is up to the manufacturer. Toyota is the one documented user: bulletin T-SB-0094-24 for the 2024 Tacoma and Tacoma Hybrid lists it as P08BA71, actuator stuck, next to the stuck faults of solenoids A, C, D, G and H and a torque converter clutch stuck off. Because Toyota reports the fault type through the suffix, the stuck valve sits under this base code rather than under P08BB/P08BC. The MIL comes on. For trucks built before the production change Toyota's fix is a new transmission with torque converter, on the hybrid also the hybrid module. GM's Corvette dual clutch tables contain no L code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / BA

Possible causes

  • Solenoid or its control valve sticking inside the valve body high
  • Internal transmission fault from production, debris spreading through the hydraulics medium
  • Contaminated or wrong transmission fluid medium
  • Connector or harness fault at the solenoid low

Symptoms

  • Check engine light on
  • Harsh, delayed or missing shifts
  • Transmission may hold a substitute gear

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P08BA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication