OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08B9

Clutch Pedal Position Sensor A/B Correlation

P08B9 is stored when two independent measurements of the clutch pedal disagree. Ford uses it in two ways per its 2020–23 gasoline OBD summary: with dual PWM sensors it compares sensor A with sensor B and decides within a second; with a single analog sensor plus two clutch switches it covers an in-range rationality fault or any switch-related mismatch, the switch part being judged over about 40 clutch cycles at different speeds. FCA patented a similar cross-check of the pedal sensor against the clutch interlock switch, which disables electronic stop-start on a mismatch and cannot always tell which part failed. Circuit faults of each sensor have their own codes (P08A9/P08AA, P08B6/P08B7).

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / B9

Possible causes

  • One of the two sensors drifting or worn so the channels no longer agree high
  • Sticking or misadjusted clutch switch on systems with one sensor plus switches medium
  • Corroded connector or wiring adding resistance to one channel medium
  • Sensor assembly or pedal stop misaligned after repairs low

Symptoms

  • Warning lamp on
  • Start-stop disabled
  • Cruise control unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P08B9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication