P08B5
Clutch Pedal Position Sensor B Circuit Range/Performance
P08B5 covers a second clutch pedal sensor whose signal lies within its electrical limits but is implausible on its own, for example stuck at one value while the pedal moves or not matching the driving state. No manufacturer documents this code publicly. Ford's dual PWM pedal sensor layout files any disagreement between the two channels under P08B9 rather than a B-only plausibility code, and GM applies the comparable in-gear plausibility check only to sensor A (P08A8: error above 4 % while a gear is engaged). CARB requires plausibility monitoring for inputs used by other diagnostics. If a manufacturer uses it, expect start-stop to be disabled; the clutch itself keeps working because it is hydraulically operated.
Possible causes
- Sensor B drifting or worn so its value no longer follows pedal travel high
- Sensor loose or misaligned on the pedal bracket medium
- Corrosion adding resistance in the sensor B circuit medium
Symptoms
- Warning lamp on
- Start-stop or cruise control unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P08B5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.