OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08B3

Neutral Position Sensor B Not Learned

Analog neutral sensors report a position value, and the control module must learn which value means neutral to cover part and fitting tolerances. P08B3 says no valid learned value exists for sensor B, typically after replacing the sensor, gearbox or module, after a software update, or after an aborted learn. No manufacturer documents P08B3 publicly; the A counterpart P086F is used by GM on the LT5 Corvette. A Schaeffler patent describes the learn: the driver engages neutral and the gears, and a run is rejected if the reading wanders too much in its roughly one-second window. FCA notes a neutral sensor learn procedure after service that restores cruise control. CARB 1968.2 (e)(15) applies. Fix is usually a relearn by scan tool.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / B3

Possible causes

  • Learn procedure not done after sensor, gearbox or module replacement high
  • Learn run aborted, lever unsteady or linkage misadjusted medium
  • Learned values erased by software update or module reset medium
  • Sensor mounted outside the learnable range or faulty low

Symptoms

  • Start-stop unavailable
  • Cruise control may be inoperative
  • Appears right after a repair or software update

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for P08B3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication