OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P08B2

Neutral Position Sensor A/B Correlation

On a manual gearbox with two neutral sensors or two channels, the engine module compares A and B. P08B2 means they disagree: one reports neutral, the other a gear, or their values differ beyond a calibrated limit, while each may look fine electrically. No manufacturer documents P08B2 publicly. A GM patent describes exactly this layout: two Hall sensors with their own magnets on the shift shaft, whose PWM outputs must be identical in neutral as an integrity check. Audi's G701 and GM's LT5 Corvette use only the A codes. CARB 1968.2 (e)(15) requires rationality monitoring of inputs. Because neutral cannot be confirmed, start-stop and remote start stay off; usual fix is aligning or replacing the sensor.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / B2

Possible causes

  • One of the two neutral sensors drifting or faulty high
  • Magnet on the shift shaft shifted or sensor misaligned after repair medium
  • Neutral position not relearned after component replacement medium

Symptoms

  • Start-stop unavailable
  • Start system warning in the cluster
  • Gear indicator may be blank or wrong

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P08B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication