P08B1
Neutral Position Sensor B Circuit Intermittent/Erratic
Neutral position sensor B, the second neutral sensor or channel on a manual gearbox's shift shaft, delivers a signal that drops out or jumps for short moments. No manufacturer documents P08B1 publicly. The closest documented case is on the A sensor: Audi's bulletin for the 2019–20 Q3 and 2022–23 A3 traces P086D/P086E to wires to sender G701 that were too short, so every gear change strained them; lengthening by 20 mm cures it. A Dura patent notes that a neutral signal must persist for a minimum time before start-stop may stop the engine, so a flickering sensor blocks the function. CARB 1968.2 (e)(15) requires circuit monitoring. Steady faults appear as P08AD, P08AF or P08B0.
Possible causes
- Wire strained or partly broken by gearbox movement high
- Loose or fretting connector contact medium
- Sensor B with intermittent internal fault low
Symptoms
- Start-stop works only now and then
- Occasional start system message
- Fault returns after clearing without visible cause
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P08B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.