P08AE
Neutral Position Sensor B Circuit Range/Performance
Sensor B is the second neutral sensor or channel on the shift shaft of a manual gearbox, complementing sensor A (P086A ff). P08AE means its signal is electrically present but implausible: it stays outside the expected window, does not change when gears are engaged, or reports neutral while the gear ratio says otherwise. No manufacturer documents this code publicly; Audi's G701 and GM's LT5 Corvette are only known to use the A codes. Per a GM patent the neutral sensor is a Hall sensor pair with a PWM output that changes with every gear, so such a plausibility check is possible. CARB 1968.2 (e)(15) requires rationality monitoring of inputs. Start-stop is usually disabled; repair often means adjusting or replacing the sensor.
Possible causes
- Sensor B or its magnet misaligned after gearbox work high
- Sensor B drifting or faulty medium
- Worn shift shaft or detent giving an unclear neutral position low
Symptoms
- Start-stop unavailable
- Start system or gear indicator message in the cluster
- No noticeable change while driving
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P08AE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.