P08AD
Neutral Position Sensor B Circuit/Open
A neutral position sensor tells the engine module whether a manual gearbox is in neutral, which start-stop, remote start and rev matching rely on. Sensor B is a second sensor or channel next to sensor A (P086A ff). P08AD flags an open or otherwise faulty sensor B circuit. No manufacturer documents this code publicly; Audi (sender G701) and GM (Corvette LT5) are only known to use the A codes. A GM patent shows why a B channel exists: two Hall sensors on the shift shaft give a PWM signal, and in neutral both must read the same. CARB 1968.2 (e)(15) requires circuit monitoring of such inputs. Expected effect: start-stop stays off; MIL status depends on the maker.
Possible causes
- Wire to the sensor broken or stretched by shift shaft movement high
- Connector at the gearbox loose or corroded medium
- Sensor B open internally medium
Symptoms
- Start-stop no longer switches the engine off
- Start system warning in the cluster
- Driving normally unaffected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P08AD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.