P08A4
Gear Lever X Position Sensor 1/2 Correlation
An electronic selector lever with redundant sensing measures the X axis with two sensors. P08A4 means the two X readings no longer agree although each may be within its own limits. No manufacturer documents P08A4 publicly. GM, which runs dual PWM lever sensors, folds this comparison into the range/performance codes: P089B sets when X sensor 2 differs from sensor 1 by more than 12 % duty cycle. GM patents describe the principle: each sensor is checked against the gate and against its partner, and on disagreement the module trusts the more robust signal or commands neutral or park. CARB 1968.2 (e)(15) demands such plausibility monitoring. Y-axis counterpart is P08A5, the whole system P08A6.
Possible causes
- One of the two X sensors drifting high
- Magnet carrier or lever mechanism shifted or worn medium
- Contact resistance on one sensor's signal path medium
Symptoms
- Shifter warning message
- Range selection refused or vehicle held in neutral or park
- Check engine light, depending on the manufacturer
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P08A4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.