P08A3
Gear Lever Y Position Sensor 2 Circuit Intermittent/Erratic
This code covers short dropouts or jumps in the signal of the second, redundant Y-axis sensor of an electronic selector lever. No manufacturer documents P08A3 publicly. GM, the only proven user of this sensor family, uses only range/performance, low and high (P08A0 to P08A2) in all OBD tables from 2016 to 2025 and catches an unsteady PWM signal through the frequency check inside P08A0. CARB 1968.2 (e)(15) requires input components to be monitored for circuit faults and plausibility. GM's patent on two redundant lever sensors explains why a second sensor exists: if one becomes invalid, the other keeps range selection alive. Expect loose contacts in the console harness; the MIL status depends on the maker.
Possible causes
- Loose or fretting contact at the selector connector high
- Harness chafed by console or lever movement medium
- Sensor 2 with intermittent internal fault low
Symptoms
- Stored fault that comes and goes, often without driver complaint
- Occasional shifter warning message
- Possibly check engine light, depending on the manufacturer
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P08A3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.