P089F
Gear Lever Y Position Sensor 2 Circuit
Gear lever position sensor 2 is the redundant second sensor of an electronic selector lever, next to sensor 1 (P0821 ff), for the X or Y axis. The only documented user is GM's electronic range selection with PWM Hall sensors, as in the Cadillac XT4, and only for range, low and high. Following GM's patent, an invalid sensor is dropped and the other carries on; with both invalid the module can request park. P089F, the general circuit fault of Y sensor 2, is used by no maker found; GM reports that sensor under P08A0 to P08A2. In GM's patent a sensor counts as invalid as a whole once its X or Y value fails.
Possible causes
- Wire or connector at the selector module open high
- Sensor 2 faulty medium
- Corrosion from liquid in the console low
Symptoms
- Gearbox or selector warning in the cluster
- Range selection delayed or limited
- Usually still drivable, sensor 1 takes over
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P089F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.