P089E
Gear Lever X Position Sensor 2 Circuit Intermittent/Erratic
Gear lever position sensor 2 is the redundant second sensor of an electronic selector lever, next to sensor 1 (P0821 ff), for the X or Y axis. The only documented user is GM's electronic range selection with PWM Hall sensors, as in the Cadillac XT4, and only for range, low and high. Following GM's patent, an invalid sensor is dropped and the other carries on; with both invalid the module can request park. P089E, for jumping or briefly dropping X sensor 2 signals, is used by no maker found; GM catches signal disturbances through the frequency error under P089B. The counterpart for sensor 1, P0823, is unused as well.
Possible causes
- Loose contact at the selector connector high
- Sensor 2 with internal dropouts medium
- Wire chafed in the console low
Symptoms
- Selector warning at times
- Range selection hesitates sporadically
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P089E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.