P0899
Transmission Control System MIL Request Circuit High
The MIL request circuit is a dedicated wire over which the gearbox module asks the engine module to switch on the MIL. Today that request travels over CAN and shows as P0700 in the engine module; older Subarus, also sold as Saab 9-2X, used a single serial wire with its own codes P0864 to P0866. P0899 means the request wire stays high: an open line held up by the engine module's pull-up, a short to voltage or, with active-low logic, a gearbox module without power. No maker documents the code; Subaru's equivalent is P0866, set after more than 3 s high with MIL after two trips.
Possible causes
- Wire open (pull-up in the engine module) high
- Short to voltage medium
- Gearbox module without power or ground medium
- Gearbox module faulty low
Symptoms
- MIL on
- Gearbox faults may not be reported
- Limp mode as well if the gearbox module has no power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0899
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.