P0897
Transmission Fluid Deteriorated
Allison's 'Prognostics' in its fourth and fifth generation controls (1000 to 4000 series, buses and trucks, from 2009) has no fluid quality sensor: the gearbox module calculates. No car maker is known to use these codes. Its oil life monitor counts down the remaining fluid life from operating hours, distance, shifts and load factors such as fluid temperature, open converter and retarder use. With little life remaining, TRANS SERVICE shows for two minutes after every start; if the change and reset do not follow within a set period, CHECK TRANS lights and P0897 becomes active. Correct calculation assumes approved fluid (TES 295/668).
Possible causes
- Fluid change interval exceeded high
- Fluid changed without resetting the oil life monitor medium
- Heavy duty (heat, stop-and-go, retarder) shortens calculated life medium
- Prognostics disabled afterwards (Allison special case) low
Symptoms
- CHECK TRANS lamp on
- TRANS SERVICE or wrench indicator after each start beforehand
- Driving usually normal
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0897
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.