P0896
Shift Time Too Long
Shift time is the duration of the speed transition from the old to the new ratio, measured from input and output speed. Gearbox modules adapt fill time and pressure to keep it in a calibrated window; the code sets when adaptation is at its limit and the time is still outside. No maker could be found using these generic codes; Saab's 1994 900 automatic monitored the same with its own code P1832, a window of 0.3 to 1.3 s and a limp program. P0896 means the transition takes longer than the window: the engine flares between gears from low pressure or worn plates. Long shifts heat the clutches, so a fixed gear is a common reaction.
Possible causes
- Low or worn fluid, low pressure (pump, filter) high
- Worn clutch plates or band high
- Pressure or shift valve sticking, leaking piston seals medium
- Lost or reset adaptation, software low
Symptoms
- Delayed shifts, engine flares between gears
- Transmission warning lamp
- Limp mode in a fixed gear
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0896
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.