P0895
Shift Time Too Short
Shift time is the duration of the speed transition from the old to the new ratio, measured from input and output speed. Gearbox modules adapt fill time and pressure to keep it in a calibrated window; the code sets when adaptation is at its limit and the time is still outside. No maker could be found using these generic codes; Saab's 1994 900 automatic monitored the same with its own code P1832, a window of 0.3 to 1.3 s and a limp program. P0895 means the shift completes faster than the window: clutch pressure too high or applied too early, giving a harsh shift.
Possible causes
- Pressure control valve stuck towards high pressure or line pressure too high high
- Shift adaptation faulty or reset, wrong software medium
- Valve body: sticking spool, faulty damper or accumulator medium
- Wrong fluid or level low
Symptoms
- Harsh, jerky shifts
- Transmission warning lamp
- Limp mode possible
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0895
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.