P0894
Transmission Component Slipping
P0894 reports slip of a gearbox component, found by comparing speeds. GM's 4L60-E applies it to the torque converter clutch: with lock-up commanded, slip between 100 and 550 rpm for 12.75 s on the third attempt in 4th gear sets it, type B with MIL after two trips; the module first freezes adaptation and raises line pressure. Lexus (Aisin AB60F) and Allison 1000 use it for a slipping shift element or low pressure and name the fluid level first. On the 4L60-E a cracked converter clutch PWM solenoid is a known cause.
Possible causes
- Low, wrong or worn fluid high
- Converter clutch PWM solenoid cracked or regulator bore worn (GM 4L60-E) high
- Worn clutch plates or converter clutch lining medium
- Pump not priming, cracked suction filter (Allison) medium
- Control module software low
Symptoms
- Engine speed rises without matching acceleration, mostly when warm
- Shudder during lock-up
- Harsh shifts from maximum pressure, limp mode possible
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0894
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 5 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006trans5_a .pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006trans11 .pdf
- static.nhtsa.gov/odi/tsbs/2018/MC-10145478-9999.pdf
- static.nhtsa.gov/odi/tsbs/2013/MC-10133847-9999.pdf
- fenderbender.com/running-a-shop/operations/article/33027467/gm-4l60-65-70e-with-code-p0894