OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0890

TCM Power Relay Sense Circuit Low

Some gearboxes draw their power through a relay, such as the transmission control relay in Chrysler's fuse box that feeds the solenoids. P0885 to P0887 cover the coil control of that relay, P0888 to P0892 its sense line, which reads back the switched output and compares it with the command. A dead relay leaves all solenoids without power, so the gearbox drops into its hydraulic emergency gear. P0890 means the relay delivers no voltage despite the command. Subaru documents it in four bulletins from 2022 to 2025 (Ascent, WRX, Impreza, Crosstrek, Forester): after a short trip below 0 °C condensation freezes the ignition relay contacts, the starter does not crank and P0700 often comes along. Engine module software cycles the contacts; the 2025 Forester also gets a vented relay.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 90

Possible causes

  • Relay contacts frozen or corroded (Subaru ignition relay) high
  • Outdated engine module software (Subaru) high
  • Fuse or wire between relay and gearbox module medium
  • Weak battery low

Symptoms

  • Starter does not crank after a short trip in frost (Subaru)
  • MIL on, P0700 in the engine module
  • False oil level or other warnings

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for P0890

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication