P088D
Reverse Inhibit Control Circuit High
The reverse inhibit solenoid on GM's six-speed manual gearboxes (Corvette, Camaro, CTS-V, ATS-V) blocks reverse while driving forward and is released by the engine module. A low-side driver with built-in diagnosis watches the control line: above 9 V and 250 rpm, 20 faults in 25 samples of 250 ms (about 6 s) set the code. GM rates it type C without MIL; from 2019 a service message appears. P0801 is the open circuit. P088D means the control line is shorted to voltage: when the driver switches on it sees too high a level or overcurrent, and the solenoid can no longer be operated, so reverse may stay locked.
Possible causes
- Control wire shorted to a supply wire in the harness high
- Solenoid coil low-resistance or shorted (driver overcurrent) medium
- Moisture or corrosion between supply and control pin medium
- Engine module driver faulty low
Symptoms
- Reverse cannot be engaged (lockout not released) or is not blocked
- Service message (GM from 2019), no MIL
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P088D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.